secondintelligent

  In industries including electronics manufacturing, new energy and automotive manufacturing, RTV silicone (Room Temperature Vulcanizing silicone) is widely used in component fixing, waterproof sealing, thermal conductive filling and other processes due to its excellent adhesion, sealing, insulation and high- and low- temperature resistance. With more than 20 years of deep cultivation in the fluid dispensing field, Second Intelligent has launched a benchtop RTV dispensing system. With core advantages of high precision, high stability and strong compatibility, it has become the preferred equipment for dispensing RTV silicone and thermal gel, helping enterprises achieve automated and efficient production. (1) Industry Pain Points: Core Challenges in RTV Dispensing Processes 2. Dual Mode Adhesive Supply System for Full-Scenario RTV / Thermal Gel Applications Targeting mainstream packaging formats including 2600 ml RTV silicone cartridges and 150 cc thermal gel syringes, the equipment ...

  Configurations In industrial manufacturing, two-component acrylic AB adhesive (commonly known as “red-green adhesive” or structural adhesive) is widely used in automotive structural parts, battery PACK assemblies, filter sealing, electronic potting, industrial assembly and hardware & electronics industries. It features fast curing, high bonding strength, excellent impact resistance and good tolerance that does not require strict degreasing. However, this “high-performance adhesive” can be temperamental during dispensing: it is highly corrosive, cures extremely quickly (with an open time of only 3-15 minutes), and is highly sensitive to mixing ratios. Many enterprises often overlook metering accuracy, select inappropriate mixing methods, or use mismatched core components when choosing dispensing equipment for two-component acrylic AB adhesives. This leads to issues such as inconsistent adhesive ratios, uneven mixing, and unstable dispensing, which in turn cause bonding failure...

  Analysis of the Dual-Valve Design in Second Intelligent’s Inline Precision Coating Solution Background of the Solution Based on Second Intelligent’s current inline precision coating solution and the customer’s process requirements ( conformal coating machine + localized precision dispensing), the core logic behind the design of the “Z-axis Dual Valve Assembly” is not simply to add another valve, but to solve the problem of “different process requirements existing on the same product” in electronic coating applications. According to the solution proposal, the customer is currently using: 1.Conformal coating material 2.Viscosity: 15~20 cps (low viscosity) 3.Process requirements include 1.Large-area spray coating coverage 2.Localized precision dispensing / touch-up coating Second Intelligent’s dual-valve inline precision coating solution is not simply about adding another dispensing valve . Instead, it adopts a combined “spraying + precision touch-up dispensing” process design to so...

  In plastic extrusion processes, the purpose of using a hot melt adhesive supply system is not simply “to  dispense adhesive .” The real objective is to achieve a continuous, stable, and controllable inline bonding process. Especially in extrusion applications, which are continuous manufacturing processes, manual adhesive application or simple pressure-fed dispensing systems are usually unable to meet process requirements. 1. Why Is Hot Melt Adhesive Especially Suitable for Extrusion Processes? Extrusion itself is a continuous production process. Typical products include: ● Plastic profiles ● Sealing strips ● Films ● Tubes and pipes These products are continuously extruded while moving forward on the production line without interruption. Therefore, the adhesive system must also provide: ● Continuous dispensing ● Continuous metering ● Continuous synchronization Hot melt adhesive is naturally well suited for this type of manufacturing process. 2. Key Advantages of Hot Melt Adh...

  Desktop dispensing machine application: How to apply Two-component servo adhesive dispensing to the heat sink of an electrical appliance? hashtag # adhesivedispensing hashtag # servoadhesive hashtag # dispensingrobot Using a desktop dispensing machine with two-component servo adhesive dispensing technology for heat sinks in electrical appliances is an advanced process solution that significantly improves dispensing accuracy, production consistency, and adhesive utilization. What you call “Two-component servo adhesive dispensing ” essentially means: two independent servo motors push the two adhesive cylinders, A and B, synchronously according to a set ratio. 1. Equipment Configuration General desktop dispensing platform configuration: ● XYZ three-axis desktop dispensing machine ● Dual servo pressure dispensing system (one line each for adhesive A and adhesive B) ● Static mixing tube ● Dispensing valve (anti-drip valve recommended) ● Vacuum degassing dispensing tank (option...

In automated production, the key to applying thermal grease to heat sinks using dispensing equipment lies in the precise control of the amount of grease, the application path and the equipment parameters. This typically involves three main stages: preparation, dispensing and pressing. Ι.Automated Dispensing Process? 1. Preparation and Fixing  Before dispensing, the heat sink base must be fixed to the dispensing machine’s work platform using a dedicated clamp (such as an adjustable baffle) for precise positioning to prevent displacement during dispensing. Simultaneously, the thermally conductive material needs to be connected to the dispensing system. ● Fixing the Heat Sink:  First, the heat sink base needs to be fixed to the dispensing machine’s work platform using a clamp for precise positioning to prevent displacement during dispensing. ● Connecting the Dispensing System:  The  dispensing of thermally conductive gel  is usually packaged in 30cc, 55cc syringes,...